产品简介：
Product description:
研磨钢丸为锻造产品，亦称高锰钢丸，使用高锰钢丝高速切割成圆柱体，然后再进行导角磨圆的一种产品;无空，无龟裂，不破碎，它的消耗形状由大到小，颗粒小到原颗粒的3/10时，才由抛丸机抽尘系统或分离设备清走，完成它整个使用寿命周期。这样的产品同时具备铸钢丸和钢丝切丸的优点：可均匀抛磨、不伤工件、不易破裂、耐磨度高循环抛磨的寿命长。研磨钢丸是汽摩等配件精加工的主流金属研磨材料。
Grinding steel shot is a kind of forging product, also called high manganese steel shot, which is cut into cylinder by high speed steel wire, and then the guide angle is rounded, its consumption form from big to small until the particle to the original particle 3 / 10, only by the shot blasting machine dust removal system or separation equipment to complete its entire life cycle. Such products have the advantages of both cast steel shot and steel wire cut shot: uniform polishing, no damage to the workpiece, not easy to break, wear-resistant high cycle polishing and grinding life long. Grinding steel shot is the main metal grinding material for finishing parts such as automobile and motorcycle.
制造：
Manufacturing:
用拉丝、裁切，磨圆等工艺精制而成。本产品颗粒均匀，钢丸内部不存在气孔，具有寿命长，抛丸时间短，实用于淬火齿轮、螺丝、弹簧、链条、各种冲压件、标准件及不锈钢等硬度高的工件，可达到表面去氧化皮，表面强化处理，光整、退漆、去腐蚀、无粉尘的喷丸加工、坚固工件表面突出金属本色。
It is made by drawing, cutting and milling. This product uniform particles, inside the steel shot absolutely no air hole, has a long life, short shot time, practical in hardening gear, screw, spring, chains, all kinds of stamping parts, standard parts and stainless steel artifacts such as high hardness, can be up to the surface to scale, surface strengthening processing, finishing, paint, corrosion, free of dust peening processing and solid surface metal color.
用途：
PURPOSE:
产品广泛应用于有色金属压铸件、浇铸件，铝型材、汽车零部件、机械制造业、研磨钢丸硬度适中，成份精纯，覆盖面大。
Products are widely used in non-ferrous metal die casting, casting, aluminum, auto parts, machinery manufacturing, grinding steel shot hardness moderate, ingredients fine, coverage.
特征：
FEATURES:
由于本身没有一般铸钢丸的气孔、异型等缺点，它的使用寿命更为长久，该产品性能完全可以替代进口产品，而价格大幅度低于进口产品，为客户节省成本。
Because itself does not have the general cast steel ball the porosity, the abnormal shape and so on the shortcoming, its service life is longer, this product performance can replace the import product completely, and the price is much lower than the import product, saves the cost for the customer.
化验分析报告
样品
SAMPLES		 研磨钢丸
GRINDING STEEL BALLS		 报告编号
REPORT NUMBER		 2020-03-16
化学元素
CHEMICAL     ELEMENTS		 C. SI. Mn. S. P 分析日期
ANALYSIS DATE		 2020-03-16
序号
ORDER		 结果  %    RESULT  PERCENT
碳 C 硅 Si 锰 Mn 硫 S 磷 P
  0.45-0.85% 0.15-0.35% 0.30-1.30% ≦ 0.040% ≦ 0.040%
硬度
HARDNESS		  42-52HRC
密度
MIN DENSITY		  ≧7.4g/cm³
金相组织
METALLOGRPHI   CAL
STRUCTURE		 形变珠光体
DEFORMED   PEARLITE             
外观
EXTERNAL  FORM		 优    
 EXCELLENT
化验标准：              JB/T8354-1996
LABORATORY  STANDARD: JB/T8354-1996