新丝切丸
技术要求
Technical Requirements
弹丸类型:新丝切丸
Pellet type: New Silk Cut pellet
外形:圆柱形(1:1)
Technical Requirements
弹丸类型:新丝切丸
Pellet type: New Silk Cut pellet
外形:圆柱形(1:1)
PROFILE: CYLINDER SHAPE (1:1)
规格型号:1.0mm
Specification: 1.0 mm
抽样:按 GB/T19816.1-2005 的规定抽样
Sampling: According to GB / T 19816.1-2005. Sampling
不良特征:形状:圆柱形(1:1)非上述形状颗粒数不超过 5%
UNDESIRABLE CHARACTERISTICS: SHAPE: cylindrical (1:1) the number of particles not exceeding 5%
异形:≤5%
ABNORMITY: ≤5%
连体:≤5%
conjoined: ≤5%
尖角:≤5%
SHARP ANGLE: ≤5%
拖尾:≤5%
trailing: ≤5%
缺陷总量:≤10%
total defect: ≤10%
含水量:质量分数不大于 0.2%
moisture content: Mass fraction not more than 0.2%
规格型号:1.0mm
Specification: 1.0 mm
抽样:按 GB/T19816.1-2005 的规定抽样
Sampling: According to GB / T 19816.1-2005. Sampling
不良特征:形状:圆柱形(1:1)非上述形状颗粒数不超过 5%
UNDESIRABLE CHARACTERISTICS: SHAPE: cylindrical (1:1) the number of particles not exceeding 5%
异形:≤5%
ABNORMITY: ≤5%
连体:≤5%
conjoined: ≤5%
尖角:≤5%
SHARP ANGLE: ≤5%
拖尾:≤5%
trailing: ≤5%
缺陷总量:≤10%
total defect: ≤10%
含水量:质量分数不大于 0.2%
moisture content: Mass fraction not more than 0.2%
化验分析报告
样品 SAMPLES |
新丝切丸 STEEL CUT WIRE SHOT |
报告编号 REPORT NUMBER |
2019-10-01001 | ||||
化学元素 CHEMICAL ELEMENTS |
C. SI. Mn. S. P |
分析日期 ANALYSIS DATE |
2019-10-01 | ||||
序号 ORDER |
结果 % RESULT PERCENT | ||||||
碳 C | 硅 Si | 锰 Mn | 硫 S | 磷 P | |||
0.45-0.85% | 0.10-0.35% | 0.30-1.30% | ≦ 0.05% | ≦ 0.05% | |||
硬度 HARDNESS |
40-52HRC | ||||||
密度 MIN DENSITY |
≧7.4g/cm³ | ||||||
金相组织 METALLOGRPHI CAL STRUCTURE |
形变索氏体或屈式体 DEFORMED SORBITE OR FLEXOR |
||||||
外观 EXTERNAL FORM |
优 EXCELLENT |
||||||
化验标准: JB/T8354-1996 LABORATORY STANDARD: JB/T8354-1996 |